Skip to content
LawnElm

Methodology

What the facts rest on, what the check date means, and the arithmetic inside each of the five calculators, so you can see how a result was reached.

Last updated

How yard facts are sourced

Facts about grass, seasons, fertilizer, pesticide licensing, permits and safety come from state university extension services first, then state agriculture departments and regulators, then USDA and EPA, the National Weather Service and NOAA, state and local government pages, and finally the label on a product. The order and the sources we avoid are set out in the editorial policy. A figure appears on a page only if we opened the source for it. If we could not confirm it, the page describes the point without a number.

The check-date convention

Every article carries an “Updated” date and, in its Sources box, the date we last checked the sources. Updated is when we changed the page; the check date is when we last compared the page with the sources, and it may be later. Facts that have an effective date or that change by year are kept on a recheck list, and a change that affects a homeowner is recorded in the yard log.

Grass belts and state pages

For the map and the state pages, every state is placed in one of four belts, the one that covers most of that state’s lawns:

  • Cool belt: cool-season grasses such as Kentucky bluegrass, fescues and ryegrass dominate, and growth peaks in spring and fall.
  • Transition belt: both cool-season and warm-season grasses are grown, and neither thrives all year.
  • Warm belt: warm-season grasses such as bermudagrass, zoysia, St. Augustine, centipede and bahiagrass dominate and slow down or go dormant in winter.
  • Dry West: arid and semi-arid states where lawns depend on irrigation and water rules shape the yard.

A belt is a generalization. A yard near a belt’s edge, at high elevation or on the coast can differ by weeks, and the state page says where the state crosses a line. Each state page gives the mowing season, the state’s fertilizer rules, who needs a pesticide license for lawn work, and the regulating agency, each from that state’s own extension service or agency. If a state’s official source did not confirm a point, the page describes it in general terms rather than filling the gap.

No price tables

LawnElm publishes no prices and no price ranges. Prices depend on the size and slope of the lot, local labor, the season and the company. Where a page deals with cost, it names what drives a quote and sends you to the yard budget tool, which uses prices you type from your own quotes. Some tool fields open with example figures so the page shows a result at first sight; they are placeholders to replace, not prices LawnElm is reporting.

The five calculators

All five run in your browser. They send nothing to LawnElm, and they work only from what you type. They are planning aids, not quotes, bids or engineering. See the disclaimer.

Lot to lawn

Lot to lawn takes your lot size (square feet or acres; one acre is 43,560 square feet) and subtracts the footprints that are not grass: house and garage, driveway, walks and patio, and beds, trees and other things. What is left is the lawn area. The tool shows it in square feet, in acres, as a share of the lot, and in units of 1,000 square feet, which is how most feeding and seed rates are written. It does not know about slope, shade, fences or gates, and a crew may price those. Its links to the next two tools carry the lawn area in the page address so they open filled in.

Yard budget

Yard budget multiplies the price of one visit by how many times a job happens in a year, for mowing, feeding and weed control, and leaf or seasonal cleanup, then adds your one-time jobs. It divides by 12 for a monthly figure and by your lawn area in units of 1,000 square feet for a figure that lets you compare quotes for different yards. Every price is typed by you.

The one number the tool fills in for you is the count of weekly mowing visits. When you enter a ZIP code, the tool uses the first three digits to find your state, takes the state’s grass belt from its state page, and puts in a typical visit count for that belt. This is a planning default, one number for each belt, set by the LawnElm editorial team. It is not a measured count for your ZIP code and not a rule. You can change it, and you should, to match your quote or your own schedule. The ZIP code stays in your browser.

Lawn supplies

Lawn supplies works from numbers printed on the label. For fertilizer, the nitrogen share of the bag turns a nitrogen rate into product: the rate per 1,000 square feet divided by the nitrogen percentage as a decimal gives pounds of product per 1,000 square feet, which is multiplied by the area and divided by the bag weight, then rounded up to whole bags. Seed is the label rate times the area in units of 1,000 square feet, divided by the bag weight. Sod is the area plus the extra you add for cuts and edges, divided by the coverage of one pallet. Mulch, compost and topsoil are area times depth in feet to get cubic feet, divided by 27 for cubic yards. The tool does the arithmetic only. Rates and timing come from the label and your state’s extension guidance, and some states and towns limit fertilizer use.

Fence and deck

Fence and deck counts materials from the layout you enter. For a fence, gates come off the line first; the rest divided by the panel width and rounded up is the number of sections. An open run has sections plus gates plus one posts, and a run that closes on itself has one fewer. Rails are sections times rails per section, and pickets are the fenced length in inches divided by picket width plus gap. For a deck, boards run along the length: rows are the width divided by board width plus gap, each row needs the length divided by stock length rounded up, and joists are placed at your chosen spacing along the length plus one at the end. It leaves out post depth, concrete, hardware, ledgers, beams, footings, stairs and railings. Fences and decks often need a permit and a setback check with your city or county.

Snow and ice

Snow and ice finds the weight of snow on a drive or walk. Volume in cubic feet is area times depth in feet, and weight is volume times a planning density for the type of snow: 7 pounds per cubic foot for light dry snow, 15 for average snow and 20 for wet heavy snow (the North Dakota State University Extension figures). Real snow varies widely, so treat the result as a rough figure. It is not a roof-load calculation. Ice melt is the label rate per 1,000 square feet times the area in units of 1,000 square feet, divided by the bag weight and rounded up to whole bags. Use the rate printed on the bag.

Errors and updates

If a calculator gives a result that looks wrong, tell us with the numbers you entered. We check the formula and fix it, and we correct this page if the description was wrong.