Ground
Landscape design: how to plan, measure and phase a yard
A design is a scaled drawing of what you have, what you want and where each thing goes. Making it first is cheaper to change than anything you plant or pour.
By LawnElm Editorial Team Updated 8 min read
- Priced by
- The plan or the hour
- Season
- Plan first, plant by belt
- Do it yourself?
- Yes, or hire a designer
Short version
Extension services describe the same order: inventory the site, list what you need, sketch where each activity goes, then draw a final plan with plants and hard surfaces. Measure first with the lot to lawn tool, plan for the size plants will reach, and build in stages. A designer drawing the plan and a crew building it are separate jobs, and a written quote should say which one you are buying.
What landscape design covers
Landscape design is the plan for the whole yard: where people sit, cook and play, where the paths and beds go, which plants fill them, and how water moves across the ground. The University of Florida Extension lists five steps: a site inventory and analysis of soil, drainage, climate and existing plants; your needs and wants; functional diagrams that place activity spaces; conceptual designs; and a final plan with all the hard surfaces and planting details.
The same guide lists ten things to consider, among them the user's current and future needs, maintenance style and budget, linking activity areas into outdoor rooms, and accounting for plant growth and maintenance over time. The jobs that follow from a plan have their own pages: planting trees and shrubs, mulching and bed edging and grading and drainage.
Start with the site
Oklahoma State Extension has you record what exists before you decide what to add. Draw the existing structures and features, then note the conditions. A few of its measures are numbers you can check yourself.
- Sun. Full sun is 6 or more hours of direct sunlight a day, part sun is 4 to 6 hours, and shade is under 4 hours.
- Wind and heat. Note exposed and sheltered spots, and hot spots such as south-facing walls and the area near air conditioners or dryer vents.
- Low spots and slopes. Low areas stay wet and get more frost.
- Soil. Texture can be checked by rubbing a pinch between your fingers: sand feels gritty, clay smooth and silt powdery.
- Water and drainage. Wet areas, dry areas and any irrigation already in place. Slope problems are covered in grading and drainage.
- Utilities. Have underground lines marked before you plan digging. In most states that is 811.
The University of Delaware's guide starts with a base plan, a bird's-eye map of property lines, buildings and existing features at one scale. At 1/8 inch to the foot, an 80 by 160 foot lot is 10 by 20 inches on paper. The University of Florida says if you have no property plat, hire a surveyor, since guessing the location of boundaries can be a costly mistake. For the lawn side of the sketch, the lot to lawn tool works out lawn area from lot size, and measuring your yard covers the rest.
How much room things need
The University of Delaware gives reference sizes to sketch with. They are planning figures, not code requirements.
| Use | Space |
|---|---|
| Sitting or eating for two | About 25 square feet |
| Seating for 4 to 8 people | 64 to 100 square feet |
| Standing conversation | 8 square feet per person |
| Play space with a swing set | 10 by 15 feet |
| Storage for two trash or recycling bins | 2.5 by 6 feet |
| Small compost pile | 3 by 3 feet |
Plants take room too. Delaware's canopy figures are about 20 to 25 feet across for tall trees, 5 to 15 feet for medium trees and shrubs, and 1 to 5 feet for small plants. Draw the full circle when you place a plant, because the size at planting is not the size at maturity.
Plan by grass belt and region
The design steps are the same everywhere, but the plants and water change. The Florida guide says to choose plants suited to your USDA zone and to use plants that will thrive in the soil you have. Your state page shows the grass belt, and your county extension office can name plants for your area.
- Dry West. Colorado State University's PlantTalk says to plan and design a landscape before investing time and money, to improve the soil with organic matter, to match plants to their moisture needs, and to use mulch to minimize evaporation. It names buffalo and blue grama as water-conserving grasses, lists mulched areas, decks and paths as alternatives to grass, and notes that more than half of the water used in homes goes to landscapes.
- All belts. Delaware's sustainable-design list says to limit turf grass and consider low-maintenance groundcovers, favor native plants, limit impermeable surfaces and use rain gardens to soak up stormwater. The lawn you keep still follows the belt's schedule; see lawn mowing.
Which month to plant or build is covered in the yard calendar.
Phasing the work
Delaware says that once the final design is drawn you begin implementing it in stages and making adjustments as necessary. The Florida guide notes that a rainwater harvesting system is typically the first element installed, because it may require earthmoving and underground piping. In general, work that digs or moves soil comes before the plants that would be disturbed by it, which is why grading and drainage come early. Stages also let you spread the cost, and the yard budget adds one-time jobs to your yearly cost from the prices you type in.
What a design quote should say
Design is quoted as a plan, usually by the project or the hour, and installing the plan is a separate quote. Oklahoma State suggests that if you are not confident with design, you can hire someone; review photos of past projects, ask for references and visit completed work. A good designer listens to your ideas.
- What you receive: a scaled plan, a plant list with sizes, or both.
- Whether the fee includes a site visit and a measured base plan, or you supply the survey.
- Whether the designer will price or oversee the installation, or hand over the plan.
- Who checks HOA, permit and utility rules. See HOA and city yard rules and fence and deck permits.
- How many revisions are included.
Mistakes to avoid
- Drawing from memory instead of a measured plan, or guessing where the property line runs.
- Placing plants for their size today, not their mature size.
- Ignoring low spots, slope and where the water goes.
- Planning digging before utilities are marked.
- Planning more lawn than you will water and mow, when groundcovers, beds or paths would do.
Do it yourself or hire it out
A small yard is a fair weekend project on paper, and the extension guides above are written for homeowners. Hire a designer when the site has slopes or drainage trouble, when walls, large trees or hard surfaces are involved, or when you want the plan drawn to a scale a crew can build from. Hiring a crew to build it is a separate step; the questions to ask are in DIY or hire.
Questions people ask
What are the steps of landscape design?
University of Florida Extension lists five: inventory and analyze the site, list your needs and wants, draw functional diagrams of activity spaces, develop concept plans, and draw a final plan with hard surfaces and plants.
How much sun is full sun?
Oklahoma State Extension says full sun is 6 or more hours of direct sunlight a day, part sun is 4 to 6 hours and shade is less than 4 hours.
Do I need a survey to plan my yard?
You need to know where the property lines are. The University of Florida says that if you have no property plat you should hire a surveyor, because guessing at boundaries can be costly.
Should I build everything at once?
You can build in stages. The University of Delaware says to implement the design in stages and adjust as needed, and Florida says a rainwater harvesting system usually goes in first because it may involve earthmoving.
Sources
- Landscape design, ten important things to consider, EP375 (University of Florida IFAS Extension)
- Homeowner garden design series, planning the landscape (Oklahoma State University Extension)
- Designing a sustainable landscape to serve your needs (University of Delaware Cooperative Extension)
- Xeriscape basics (Colorado State University PlantTalk)
Steps, space allowances and sun definitions come from the extension pages above and were checked on November 20, 2026. Space figures are planning guides, not building-code requirements. Your county extension office can suggest plants for your zone.
Next in the yard
-
Yard job
Planting trees and shrubs
When to plant by belt, how wide and deep to dig, and how to mulch and water.
-
Yard job
Grading and drainage
How ground should slope away from a house, common fixes, and when to hire a pro.
-
Guide
Measuring your yard
How to measure lawn area, fence runs and beds, and what the numbers mean.